Shrink Sleeve Labeling Machine

I.  Auto Shrink sleeve labeling machine

1.1 characteristic

The machine and beverage mineral water production line supporting work, the connection is simple; Interface control, easy to operate, easy to understand, all failures are displayed by man-machine interface; The design of blade drive mechanism is novel, blade replacement is convenient. It is easy to replace the change parts quickly and without any special tools; Pressure type set, the thickness of the label can reach 0.03-0.10mm

 1.2 usage

 SHB-350P type automatic marking machine set a high degree of automation, strong corrosion resistance, easy operation, convenient maintenance Widely used in all kinds of bottled products, such as drink medicine dairy health products cosmetics washing supplies The products such as condiments class label, this machine is specially designed for milk bottle of label

Technical data:

2.1. main size：2400L*1100W*2200H（mm）；

2.2. weight： about 600KG；

   2.3. bottle size：Ø 25----Ø50， Ø50---- Ø95,  Ø95---- Ø125（mm）choice one and Special specifications machine can be designed separately

2.4. label length：30---280（mm）；

2.5. paper inside dimeter：5”--10”

2.6. speed of machine：22000BPH（label lengthen as 55mm），if label longer than 55mm, then speed will less.

2.7. label thickness：0.035---0.10（mm）；

2.8. label material：PVC、PET、OPS；

   2.9. main machine conveyor frame：2.4M SS frame(not including conveyor, driver motor head and driver tail)；

   2.10. voltage：3P 380V   AC±5%    50/60HZ；

   2.12. power：5.0KW；

   2.13. connection land protection： valid connection ground 20.000 square meter

   2.14. wire cable：3X4C cable, 4 square meters

   2.15. protection swift：380V-3P   25A

  Mechanical parts of table:

Product structure and function

4.1 Label cutting mechanism: built-in blade, flexible transmission structure, used for cutting label shrink film

4.2 Drive delivery mechanism: adopt servo motor control to make the label shrink film tossed as fixed the scale;

4.3 Central column device: the label contraction film is set in the center column to facilitate the cutting of the label.

4.4 Label detection institutions: the use of optical fiber transmission signal, the more accurate to provide signals to control system set size shrink label film do delivery, magic eye position can be adjust, to locate the correct cutter blade cutting;

4.5 Main engine lifting mechanism: the machine adopts high strength, corrosion-resistant stainless steel material to support the main engine and fixed conveying mechanism, and adjust the height of the driving beacon according to the height of the bottle.

4.6 For the label mechanism: the tension of the label shrink film is used to control the contraction film of the label. It is sent by the conveyor roller, decelerating motor pressure feed, and used to transmit the label shrink film.

4.7 Cylinder screw mechanism: the bottle of the subject shall be set, and the length of the screw shall be used to separate the bottles to the equal distance of the bottle.in order to label sleeve

4.8 Conveying mechanism: adjust the speed of conveyor belt with frequency converter to match the speed of local production capacity to carry the bottle;

4.9 Brush down mechanism: adopt synchronous adjustment mechanism, transfer wheel adjustment to contact with the roller under the center column. When the label passes, the label will be put into the bottle at high speed

4.10 Bottle detection mechanism: special polarized light detection photoelectric, can be left and right, up and down adjustment, used to sense the position of the bottle, output signal, make the host accurate set of standards; 

4.11 Positioning belt adjustment mechanism: to adjust the positioning belt mechanism; Aiming at the natural positioning of the semi-marked bottle type;

4.12 Brush mechanism: apply the label of the bottle to the specified location

4.13 Man-machine interface control box: for the control core of the machine, each operation display page is divided into manual, automatic, parameter setting, fault description, etc. A few knobs, buttons for other operations;

4.14 The machine is equipped with a power failure function to ensure the safety of operator.

4.15 Preheat shrinkage tunnel: use the heat of steam to precontract the label of the bottle to ensure that the label pattern is evenly deformed.

4.16 Heat shrinkable tunnel: extended thermal shrinkage tunnel design, can adjust position around the nozzle, shrink after pre the contraction of the bottle into the tunnel chamber has enough time to shrink, to ensure uniform label attached to the bottle, make the shrinkage effect more perfect.

4.17 The machine sets the card function: if the label ‘s lay flat width small or label stucked, the device will automatically alarm

Steam Shrinking tunnel is made of stainless steel

This machine is used by the steam heat Steam Shrinking tunnel adopt high-quality stainless steel SUS304, built-in steam distributor, arbitrary adjustable nozzle direction, can guarantee the stability of shrinkage furnace steam source, fully meet the production requirements of your company.

The contraction is smooth and uncrumpled

This contraction marking machine of steam jet position will be based on your company's product features individually design, nozzle direction freedom to adjust direction, to ensure the contraction after the paper surface is flat folds, and attached with a label tightly in the bottle does not fall off

 Electrical part configuration: