Water Filling Machine-Combiblock 36000BPH

Nominal output up to 0,33 l bottle

Nominal output up to 0,6 l bottle

Bph

bph

36,000

36,000

Nominal output up to 1,0 l bottle

bph

32,000

Nominal output up to 2,0 l bottle

bph

20,000

The output depends on preform and bottle geometry.

The output depends on preform and bottle geometry and may have to be   amended once preform and bottle drawings will be placed at our disposal

Effenciency (acc. DIN 8782 para. 4 )

%

95

M A C H I N E   E Q U I P M E N T

Number of blowing stations

pcs.

18

Number of Mandrels

pcs.

225

Pitch of Mandrels within heating module

mm

38

Bottles after preform infeed stop

pcs.

382

PREFORM INFEED SYSTEM

Capacity of the standard silo

m³

2.8

Sufficient for a number of 1,5 l Preforms, approx.

pcs.

20,100

Resulting running time with 1,5 l preforms

min.

48

PREFORM DIMENSIONS

Body

Preform body length min.

mm

25

Preform body length max.

mm

160

Ø inner preform body min.

mm

16

Neck

Ø neck support ring max.

mm

36

Neck height  max.

mm

25

Ø inner neck min.

mm

21

Ø inner neck max.

mm

30

NECK   FINISH TYPE (30/25;29/25;26/22 etc.)

3,025

BOTTLE DIMENSIONS

Bottle volume min.

ml

200

Bottle volume max.

ml

2,000

Ø - Diameter max.

mm

108

Height max.

mm

365

Provided that the preform/s fulfil one of the following, the machine   design is to be checked separately. This could generate additional costs.

1. wall thickness of a preform > 4 mm or

2. wall thickness of the preform tip > 3,3 mm or

3. radial stretch factors > 5,5 or

4. impervious (opaque) preforms or

5. multilayer preforms

Maximal accepted deviation of the preform temperature (inside   measuring) from the ambient temperature of the stretch blow moulding machine   (in the moment of preform feeding into the blower): +/- 2 °C in order to   ensure an uniform temperature of the preforms before going into the blower.
  Example: Ambient temperature. 15 °C .
  Temperature of the preform min. 13 °C, max. 17 °C.

REQUIRED MACHINE CHILLER

Nominal cooling capacity

kW

63.7

Nominal water flow rate

m³/h

10.8

Nominal water pressure

bar

7

Indoor installation: Allowed ambient temperature

°C

+5 - +40'

Outdoor installation: Allowed ambient temperature (with 25 % glycol   blend)

°C

-10 - +40'

AMBIENT CONDITIONS

Altitude of site

m

100

Ambient temperature max.

°C

30

BLOWING AIR

Blowing pressure

Air consumption

35

35

FILLER

MECHANICAL OUTPUT FILLER max.

bph

36,000

No. of filling valves

pcs.

60

No. of sealing elements for a pitch diameter of 720                  

pcs.

20

Filler pitch, distance valve to valve

mm

113

Filler pitch

Pi

36

Diameter of bowl pitch circle

mm

2,160

Sealing elements pitch

Pi

36

Sealing elements pitch

mm

113

CONSUMPTION VALUES

Consumption working air per 1000 containers - (valve pneumatic)

Nm³/h

0.60

Ventilation electrical units

Nm³/h

2

Regulating system valve pneumatics

Nm³/h

2

Consumption of sterile air for SC-hopper / Pick & Place Station

Nm³/h

10

Sterile working air pressure

bar(g)

6-8

PIPING

Nominal width of beverage pipe

NW

50

Nominal width of return pipe

NW

50

Nominal width of air supply

NW

25

Nominal width of water supply cold/hot water

NW

50

All data are values for information only. Binding are the technical   data based on the approved layout drawing.

MACHINE DIMENSIONS AND WEIGHTS

Floor space installed machine
  (incl. infeed system) acc. standard layout

m x m

19,5 x 12,5

Height of preform infeed system acc. standard layout

m

5.6

Weight of complete system (incl. infeed system) acc. standard layout

kg

38,700

ELECTRICA L  DATA

Voltage

TN-C    4; 400V AC, +10%/-10%

Frequency

50Hz/60Hz ± 2%

No. of standardly installed heater boxes

pcs.

18

Standardly installed heating capacity = 27 kW/heater box

kW

486

Total connected load complete system (preform infeed system, blower,   filler, capper)* ca.

kVA

614

 *) Without ext. heating unit   and chiller

**) specifications of the cable cross section relate on   single-conductor cables in copper acc. EN 60204, group 3 and is recommended   only. At any rate we would like to point out that the used conductor cross   sections are to be checked acc. to the country-specific regulations. Distance   between machine and supply max. 100 m.Environmental temperature max. 30 °C.   Laying system: Cable way Group 2, cluster 1.

***) The installation of additional heater boxes changes the total   connected load of the machine.

Permissible constant voltage deviations +5%/-10%.

Equipped   as follows  :

1 stretch blow moulder / filler block
 
   AQUABLOC 18/60-36
 
  number of blowing stations: 18
  number of filling valves: 60
  pitch between filling valves: 36Pi
  Eco-Shell-outer moulds (Ø 150 mm)
 
  for the handling of PET preforms
  incl. testing of 1 set of moulds
  incl. multicoupling for quick change of base moulds
 
 
  All components are designed for up to 50°C environmental temperature.